Supergrade Screw-Drive Upgrade Kit

Supergrade Screw-Drive Upgrade Kit

from 449.00

All-in-one kit to convert your X-Carve from belting to screwdrive!

Leadtime is approximately 10 business days.

Now shipping 2nd Generation kits - here’s what has changed:

  • All 3 screws can now be configured as either belt driven or direct drive

  • Front riser plates now accommodate the Inventables Dust Collection System pole holder

  • Wiring management has been improved, including zip tie locations to hold wires in place

Requires drilling 2 holes in the bottom of the X-Carriage. A drill template and drill bits are included.

Increases machine height by 2”.

Motors are mounted inboard to preserve machine footprint - no need to rebuild your enclosure!

15mm Gates 3GT3 closed loop belts transfer the power from your stock steppers to the acme screws

Custom made eccentric nuts are included to have full engagement in the 1/4” thick side plates. Standard nuts will chew through the aluminum over time, so we had some better ones made.

Side plates can accomodate 2 additional V wheels for extra support

X Axis acme screw sits closer to the cut, which reduces the lever arm and improves strength.

Comes partially assembled to make installation as quick as possible.

Available in 500mm, 750mm, or 1000mm lengths. Custom mixes (For example, 1000mm Y with 500mm X) can be accomodated - just email us!

“EX-CARVE” sticker and spare parts kit included!

Add a Z Axis?:
Finish?:
Add new V Wheels?:
Add Y Axis Stiffeners?:
Quantity:
Add To Cart